Use 1:5 Dilution. With an automatic doser, it can be used in urinal flushing systems, using the ratio above.

Use 1:3 Dilution. Thoroughly wet hands, use a wash action for 1 minute. Thoroughly wet to flush a wound.

Use 1:2 Dilution. Spray directly on the area, or apply with a cloth. No rinsing is required.

Use 1:1 Dilution. Spray directly into sinks and surrounding surfaces, and all hand-touch surfaces. Leave for at least 2 mins.

Use Neat. Spray liberally until wet. Leave for at least 5 minutes For blood spills then rinse away.

Use 1:5 Dilution. Apply with Mopping or Decant diluted solution into scrubber drier.

Use 1:3 Dilution. Spray directly onto cloth and wipe. For heavy soiling, use a foamer* for best results.

Use 1:2 Dilution. Thoroughly wet & leave until dissolving activity visible. Rinse & wipe clean.

Use 1:1 Dilution. A couple of minutes after application, rinse or wipe dry, then finish with Disinfect.

Use Neat. Wet using a spray or foamer* after 2-3 minutes wipe dry. Remove and place filters in a bowl.