Dilution Charts

Use 1:5 Dilution. Apply with Mopping or Decant diluted solution into scrubber drier.

Use 1:3 Dilution. Spray directly onto cloth and wipe. For heavy soiling, use a foamer* for best results.

Use 1:2 Dilution. Spray directly onto the table or Bar area then wipe clean, or spray onto a cleaning cloth and wipe the area.

Use 1:1 Dilution. Always trial a small area first. Don't over-wet; a gentle dabbing or rubbing action.

Use Neat. Wet using a spray or foamer* after 2-3 minutes wipe dry. Heavy deposits may need 2 applications.

Use 1:5 Dilution. Apply with Mopping or Decant diluted solution into scrubber drier.

Use 1:3 Dilution. Thoroughly wet the area and leave until dissolving activity is visible. Wipe clean.

Use 1:2 Dilution. Spray directly onto cloth and wipe. For heavy soiling, use a foamer* For best results.

Use 1:1 Dilution. Liberally spray the area, wait a couple of minutes then wipe clean or rinse away.

Use Neat. Wet using a spray or foamer*; after 2-3 minutes, wipe dry. Heavy deposits may need 2 applications.

Use 1:5 Dilution. Apply with Mopping or Decant diluted solution into scrubber drier.

Use 1:3 Dilution. Thoroughly wet the area and leave until dissolving activity is visible. Wipe clean.

Use 1:2 Dilution. Spray directly onto cloth and wipe. For heavy soiling, use a foamer* For best results.

Use 1:1 Dilution. Liberally spray the area, wait a couple of minutes then wipe clean or rinse away.

Use Neat. Wet using a spray or foamer*; after 2-3 minutes, wipe dry. Heavy deposits may need 2 applications.

Use 1:5 Dilution. Prepare a bowl of water with DEW, place the fruit or veg in the bowl and leave for 2 mins, then dry.

Use 1:3 Dilution. Thoroughly wet hands, use a wash action for 1 minute. Thoroughly wet to flush a wound.

Use 1:2 Dilution. Thoroughly wet & leave until dissolving activity is visible. Rinse & wipe clean.

Use 1:1 Dilution. A couple of minutes after application, rinse or wipe dry, then finish with Disinfect.

Use Neat. Wet using a spray or foamer*; after 2-3 minutes, wipe dry. Remove and place filters in a bow.

Use 1:3 Dilution. Thoroughly wet hands, use a wash action for 1 minute. Thoroughly wet to flush a wound.

Use 1:2 Dilution. Spray directly on the area, or apply with a cloth. No rinsing required.

Use 1:1 Dilution. Spray directly onto all hand touch surfaces. Wipe after 2 minutes, or leave to dry naturally.

Use Neat. Spray liberally until wet. Leave for at least 5 minutes then rinse away.

Use 1:5 Dilution. With an automatic doser, it can be used in urinal flushing systems, using the ratio above.

Use 1:3 Dilution. Thoroughly wet hands, use a wash action for 1 minute. Thoroughly wet to flush a wound.

Use 1:2 Dilution. Spray directly on the area, or apply with a cloth. No rinsing is required.

Use 1:1 Dilution. Spray directly into sinks and surrounding surfaces, and all hand-touch surfaces. Leave for at least 2 mins.

Use Neat. Spray liberally until wet. Leave for at least 5 minutes For blood spills then rinse away.

Use 1:3 Dilution. Thoroughly wet hands, use a wash action for 1 minute. Thoroughly wet to flush a wound.

Use 1:2 Dilution. Spray directly on the area, or apply with a cloth. No rinsin required.

Use 1:1 Dilution. Spray directly into sinks and surrounding surfaces and all hand-touch surfaces. Leave for at least 2 mins.

Use Neat. Spray liberally until wet. Leave for at least 5 minutes For blood spills then rinse away.

Use 1:5 Dilution. Apply with Mopping or Decant diluted solution into scrubber drier.

Use 1:3 Dilution. Spray directly onto cloth and wipe. For heavy soiling, use a foamer* for best results.

Use 1:2 Dilution. Thoroughly wet & leave until dissolving activity visible. Rinse & wipe clean.

Use 1:1 Dilution. A couple of minutes after application, rinse or wipe dry, then finish with Disinfect.

Use Neat. Wet using a spray or foamer* after 2-3 minutes wipe dry. Remove and place filters in a bowl.